Skip to content
Skip to product information
Description

A rising arc of blocks, and a controller parked right in front of it.

Block Arc Controller is a retro gamer sticker built like an old title screen: a gamepad at the center, a half-circle of blocks climbing behind it and two words in pixel type underneath. Put it on your own desk gear, or hand it to a friend whose controller you keep borrowing.

The design: a gamepad under a blocky sunrise

A half-circle of square blocks fans out in two rows, coral-red on the outside and teal on the inside, like a sunrise rendered in chunky tiles or the segments of a dial.

In front of it sits a game controller seen head-on, dark with a thick white outline and two rounded grips pointing down. Its face has a plus-shaped directional pad on the left, a teal rectangle at top center, four small round buttons set in a diamond on the right (two teal, two coral-red) and a pair of thumbsticks low in the middle. There is no logo or lettering on it.

Below the controller, two words are printed in white pixel-style capitals, a short one over a larger one: the kind of title players hand themselves after a very good night. The small word rests between short coral-red and teal bars. The big one is held in a stepped, pixel-cornered frame of coral-red, teal and gray lines with little stacked dashes at each end. All of it lies on solid black, a flat badge with the blocky feel of an early arcade screen.

An opaque kiss-cut sticker that is simple to apply

  • Kiss-cut as a square: rounded corners and a white edge set off the black background
  • High-opacity film keeps paint or an earlier sticker out of sight once it is covered
  • Application is quick, and the vinyl settles without air bubbles
  • Durable vinyl, so day-to-day handling is part of the plan
  • One reminder before you apply it: clean the surface

Who it's for

Players who grew up with pixel graphics, friends who still argue about button layouts, streamers dressing a backdrop shelf and anyone who keeps a controller within reach. Try it on a notebook cover, a laptop or the side of a storage bin for games. It works as a thank-you to a co-op partner, a stocking filler, or a small prize for whoever wins game night.

Quick answers

How much of the 15″×3.75″ sheet is the art?

One square, about 3¾″ (9.5 cm) across, centered on the sheet rather than stretched into a strip. The other three options carry that same square edge to edge, at about 3″, 4″ and 5½″.

Which gamepad is it?

None in particular. It is a generic two-grip pad with no logo or markings, so it simply reads as a controller to anyone who plays, on any system.

Is the art made of pixels?

Partly. The lettering and the blocks have the stepped look of early games, while the controller itself is drawn with smooth curves.

Is this a patriotic design?

No. The stars-and-stripes napkin and the flowers in the photos are seasonal styling. The sticker shows the controller, the block arch and the lettering, and nothing else.

Shipping and returns

Free US shipping. US delivery usually 5–12 business days. Easy 30-day returns.

Size guide

WIDTH (inches) HEIGHT (inches)
3″×3″ 2.97 2.97
4″×4″ 3.97 3.97
5.5″×5.5″ 5.5 5.5
15″×3.75″ 15 3.75

WIDTH (cm) HEIGHT (cm)
3″×3″ 7.54 7.54
4″×4″ 10.08 10.08
5.5″×5.5″ 13.97 13.97
15″×3.75″ 38.10 9.53

Retro Gamer Sticker – Block Arc Controller Gamepad Badge Decal

Regular price $13.95 USD

Free US shipping · International rates at checkout

For the one who claims the good controller and still wins with the spare.

Why it suits desk gear

  • Arcade-dial look — tiled segments curve over a front-facing pad, with chunky type stacked beneath.
  • Clean cover-up — the film is not see-through, and it flattens out evenly as you press.
  • New-desk present — tape one inside a card when a friend finally finishes building their gaming corner.
  • 3″×3″
  • 4″×4″
  • 5.5″×5.5″
  • 15″×3.75″

Free US shipping · Easy 30-day returns · US delivery usually 5–12 business days

A rising arc of blocks, and a controller parked right in front of it.

Block Arc Controller is a retro gamer sticker built like an old title screen: a gamepad at the center, a half-circle of blocks climbing behind it and two words in pixel type underneath. Put it on your own desk gear, or hand it to a friend whose controller you keep borrowing.

The design: a gamepad under a blocky sunrise

A half-circle of square blocks fans out in two rows, coral-red on the outside and teal on the inside, like a sunrise rendered in chunky tiles or the segments of a dial.

In front of it sits a game controller seen head-on, dark with a thick white outline and two rounded grips pointing down. Its face has a plus-shaped directional pad on the left, a teal rectangle at top center, four small round buttons set in a diamond on the right (two teal, two coral-red) and a pair of thumbsticks low in the middle. There is no logo or lettering on it.

Below the controller, two words are printed in white pixel-style capitals, a short one over a larger one: the kind of title players hand themselves after a very good night. The small word rests between short coral-red and teal bars. The big one is held in a stepped, pixel-cornered frame of coral-red, teal and gray lines with little stacked dashes at each end. All of it lies on solid black, a flat badge with the blocky feel of an early arcade screen.

An opaque kiss-cut sticker that is simple to apply

  • Kiss-cut as a square: rounded corners and a white edge set off the black background
  • High-opacity film keeps paint or an earlier sticker out of sight once it is covered
  • Application is quick, and the vinyl settles without air bubbles
  • Durable vinyl, so day-to-day handling is part of the plan
  • One reminder before you apply it: clean the surface

Who it's for

Players who grew up with pixel graphics, friends who still argue about button layouts, streamers dressing a backdrop shelf and anyone who keeps a controller within reach. Try it on a notebook cover, a laptop or the side of a storage bin for games. It works as a thank-you to a co-op partner, a stocking filler, or a small prize for whoever wins game night.

Quick answers

How much of the 15″×3.75″ sheet is the art?

One square, about 3¾″ (9.5 cm) across, centered on the sheet rather than stretched into a strip. The other three options carry that same square edge to edge, at about 3″, 4″ and 5½″.

Which gamepad is it?

None in particular. It is a generic two-grip pad with no logo or markings, so it simply reads as a controller to anyone who plays, on any system.

Is the art made of pixels?

Partly. The lettering and the blocks have the stepped look of early games, while the controller itself is drawn with smooth curves.

Is this a patriotic design?

No. The stars-and-stripes napkin and the flowers in the photos are seasonal styling. The sticker shows the controller, the block arch and the lettering, and nothing else.

Shipping and returns

Free US shipping. US delivery usually 5–12 business days. Easy 30-day returns.

Size guide

WIDTH (inches) HEIGHT (inches)
3″×3″ 2.97 2.97
4″×4″ 3.97 3.97
5.5″×5.5″ 5.5 5.5
15″×3.75″ 15 3.75

WIDTH (cm) HEIGHT (cm)
3″×3″ 7.54 7.54
4″×4″ 10.08 10.08
5.5″×5.5″ 13.97 13.97
15″×3.75″ 38.10 9.53
Retro gamer sticker, 5.5″×5.5″: dark gamepad under a coral-red and teal block arch on black, by a stars-and-stripes napkin
Retro Gamer Sticker – Block Arc Controller Gamepad Badge Decal

✨ Made to Order

This product is created just for you after you place your order, which is why it takes us a little longer to get it to you. Thank you for making a thoughtful purchasing decision!

Drawer Title
Similar Products

Retro Gamer Sticker – Block Arc Controller Gamepad Badge Decal

RaZits

RaZits